氮化38CrMoAIA橡膠擠出機冷餵料單螺桿機筒

簡短說明：

冷餵橡膠螺桿是橡膠擠出機的核心部件，專門設計用於在室溫下直接加工橡膠混合物。 It enables efficient plasticization and extrusion molding. Its design enhances the effects of shearing and mixing, ensuring that the rubber compound achieves uniform temperature and plasticity.

發送電子郵件給我們

產品詳情

產品標籤

產品說明
冷餵橡膠螺桿是橡膠擠出機的核心部件，專門設計用於在室溫下直接加工橡膠混合物。 It enables efficient plasticization and extrusion molding. Its design enhances the effects of shearing and mixing, ensuring that the rubber compound achieves uniform temperature and plasticity.
技術規格
氮化層深度：0.5mm-0.8mm
氮化物硬度：950-1020HV
氮化脆性：≤一級
表面粗糙度：Ra0.4um
螺桿直線度：0.015mm
合金硬度：HRC65
合金深度：1.2mm-2.0mm
鉻層厚度：0.03~0.10mm

冷餵料橡膠螺桿、機筒：
規格：Ф40-Ф300MM
大長徑比：L/D=8-20

熱餵料橡膠螺桿、機筒：
規格：Ф30-Ф250MM
大長徑比：L/D=4-8

銷釘橡膠螺桿和機筒：
規格：Ф60-Ф250MM
大長徑比：L/D=12-18

應用
The cold feeding screw is mainly used for products such as conventional rubber sealing strips and rubber inner tubes that have relatively
密封性要求低。